Wednesday, October 6, 2010

Swedish Dala Horse Block Print (Tutorial & Download)




I love dala horses. My grandfather's family originated from Sweden and when I was little I received these Swedish handcrafted wooden horses as gifts. I thought a block print of a dala horse would be so cute to use for notecards, clothing and garland.


I decided on a simple image to use on both paper products and clothing:


To make a block print, you'll need:
Speedy-carve block
Basic carving tool set
Brayer
Screen printing ink or fabric paint for printing on fabric or craft paints if printing on paper
Small piece of glass (I took mine from an discarded photo frame)


Step 1: Print off your image in reverse and make sure it fits onto your carving block:


Step 2: Transferring the image to the block. Use a warm iron to transfer your image from a freshly printed laser or ink jet image. Just press firmly, make sure not to melt your block and burnish the back of the paper periodically until you start to see the image left behind on the block.


The transferred image will be fairly light but you can see it more clearly by tilting it in different light.


Use a pen or pencil to draw in your image more clearly:



Step 3: Carving out the image. Using your carving tools carefully carve out the outline of the image and all the "negative" areas:


Carefully carve out the area around the image:


And finally, cut out around the image as shown below:


Step 4: Applying ink to your print. Apply a small amount of ink or paint to your piece of glass. Using the brayer, roll a small area out to a thin even layer:


Using the brayer, apply a thin, even coat of ink to the block carving:


Place the carving face down on fabric or paper and press firmly. Carefull lift up to reveal the printed image.


Your first print will be a test to see which areas of the block you still need to carve out....you can tell in the image below that some areas were left outside of the horse image that needed to be carved out:



With a little practice you will get a perfect print:


I used this particular dala horse print as an applique for a shirt. Make sure to heat set your prints if you are printing on fabric.


Some ideas? You could print a pillow, a t-shirt or the bottom border of a dress. You could also print on paper to make some simple artwork, notecards, garland, or a notebook cover for a gift!






Feel free to use my dala horse image to make your own print!
Dala Horse

Copyright © 2010 by Ashley Hackshaw/Lil Blue Boo. All rights reserved. This dala horse image is for personal and home use only. Please email me at ashley (at) lilblueboo.com for more information. Thank you for respecting my copyright! View copyright information here:

MyFreeCopyright.com Registered & Protected

10 comments:

  1. Ashley, this is amazing. It will have so many applications. Thank you!

    ReplyDelete
  2. FAB! Love it and I hope you use that for a christmas card or something this year cause i want one ;)

    ReplyDelete
  3. I love your dala horse! Thanks for the great tip about transferring the image with the iron! I'll have to try it.

    ReplyDelete
  4. Way too cool - thanks for sharing :0)

    ReplyDelete
  5. Wow! That is so great! I LOVE it!
    So much could be done with that. I would have that all over EVERYTHING!!! haha
    Love it!

    ReplyDelete
  6. Hi, Ashley! That is so pretty, and you made such a great tutorial for it. Tanks so much for the wonderful pattern, I love it! (And need it, 'cause my drawing skill stopped at about kindergarten level!)

    ReplyDelete
  7. It's amazing. You are my hero =)))
    Thank you very much

    ReplyDelete

I love comments....they help me figure out what you enjoy reading! I read and appreciate every single one but I receive so much email that it is impossible for me to reply to everyone! Please email me directly if you have a specific question and please leave your email if it isn't published on your profile.... otherwise I don't have the means to contact you!